Submersible dirty water pump SP7 Dirt Inox

With level sensor and integrated prefilter: the SP 7 Dirt Inox submersible dirty water pump copes with up to 15,500 l/h of dirty water in demanding drainage tasks.

An individually adjustable level sensor starts the dirty water pump Z SP 7 Dirt Inox immediately upon contact with water. If the water level again drops below the level sensor, the pump stops automatically after 15 seconds. The extremely powerful submersible pump is ideal for draining, for example, large garden ponds, flooded cellars or flooded building pits (max. 100 m²), as it can reliably pump dirty water (dirt particles of up to 30 mm) at a rate of up to 15,500 l/h. With even dirtier water, the integrated pull-down stainless steel prefilter serves to protect against blockages. The submersible pump can also be switched to continuous operation by means of the Automatic/Manual switch. It can reliably pump water away down to a residual water level of 35 millimetres both in continuous operation and in automatic mode, when the level sensor is set accordingly. With the Quick Connect connection thread, 1", 1 1/4" and 1 1/2" inch hoses can be connected without complication. Thanks to the stainless steel housing and robust slide ring sealing, the pump has a particularly long service life. An extended warranty of five years is available as an option.

Specifications

Technical data

Residual water height 35 mm
Connection thread G1 1/2
Pressure-side connection thread G1/2 internal thread
Max. flow rate 15500 l/h
Delivery temperature, max. 35 °C
Weight without accessories 6.7 kg
Max. grain size 30 mm
Max. immersion depth 7 m
Min. residual water, manual 35 mm
Max. motor rating 750 W
After-running time 15 s
Dimensions (L × W × H) 238 x 287 x 354 mm
Power cable H07RN8-F - 10 m
Delivery height / Max. pressure 8 m - 0.8 bar
Frequency 50 Hz
Voltage 230 - 240 V

Equipment

  • In automatic operation (auto), the pump automatically switches with the water level
  • Comfortable carrying handle
  • Integrated stainless steel pre-filter
  • Level sensor: Continuous switching level definition
  • In manual operation, the pump runs continuously until the minimum quantity of residual water is reached
  • Hose connection piece, 1'', 1 1/4'', 1 1/2''
  • Easy hose connection thanks to Quick Connect
  • Switching between manual/automatic operation, Switch on the pump